FIS EM Plus 390 S Eproxy Injection Mortar Anchoring Adhesive
Solo: 1 unit Injection Mortar
Set: 6 units Injection Mortar + FREE 1 unit caulking gun
Features：
- FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
- The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
- For rebar connections from diameter 8 to 40 mm.
- Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
- FIS EM Plus is to be processed at temperatures down to -5°C.
- More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.
Description：
The fischer injection mortar FIS EM Plus 390 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, high racks, or heavy-duty steel constructions.
Advantages：
- The ETA assessment guarantees a service life of 100 years. The expert report of IEA Stuttgart even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
- The optimised formulation of the epoxy resin mortar FISEMPlus leads to improved load values in cracked and non-cracked concrete.
- The mortar can be used for rebar connections from diameter 8 to 40, including seismic applications.
- With the threaded rod FISA, the loads to be applied can be designed variably by selecting the anchorage depth.The mortar is approved for diamond drilled and water-filled drillholes as well as seismic applications and thus offers safety under extreme conditions.
- For practical use on the building site, FISEMPlus can be processed at low temperatures down to -5°C.
Functionality
- The epoxy mortar FIS EM Plus combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
- The mortar is injected bubble-free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
- The anchor is set manually by lightly rotating it until it reaches the drill hole base.
- During push-through installation, the annular gap between the anchor rod and attachment is fill
