MAKITA HR011GM202 / HR011GZ 40Vmax Cordless 3-Modes Combination Hammer 28MM (1-1/8")

HR011GM202 40Vmax Cordless 3-Modes Combination Hammer (2 x 4.0Ah Full Set) Included:

1 x HR011G 40Vmax Cordless 3-Modes Combination Hammer

2 x BL4040B 4.0Ah Battery

1 x DC40RA Rapid Charger

1 x MAKPAC Connector Case Type 4

1 x DX17 Dust Collection System

HR011G 40Vmax Cordless 3-Modes Combination Hammer (2 x 2.5Ah/2.0Ah Full Set) Included:

1 x HR011G 40Vmax Cordless 3-Modes Combination Hammer

2 x BL4025B/BL4020B 2.5Ah/2.0Ah Battery

1 x DC40RA Rapid Charger

HR011G 40Vmax Cordless 3-Modes Combination Hammer (1 x 4.0Ah/2.5Ah/2.0Ah Full Set) Included:

1 x HR011G 40Vmax Cordless 3-Modes Combination Hammer

1 x BL4040B/BL4025B/BL4020B 4.0Ah/2.5Ah/2.0Ah Battery

1 x DC40RA Rapid Charger

HR011GZ 40Vmax Cordless 3-Modes Combination Hammer (Machine Only) Included:

1 x HR011G 40Vmax Cordless 3-Modes Combination Hammer

Standard Equipment:

Side Grip, Depth Gauge, Grease Vessel

Features:

✅ Overview:

The HR011G is a cordless 28mm (1-1/8") SDS-plus combination hammer powered by a 40Vmax XGT Li-Ion battery. This tool delivers an impact energy of 3.3 J, a no-load speed of 0 to 1,130 rpm, and an impact rate of 0 to 5,000 bpm. It remains compact and lightweight even when the dust collection system is attached.

Anti-Vibration Technology (AVT), including a counterweight mechanism, a vibration-absorbing handle structure, and an anti-vibration grip, reduces vibration transmitted to the hands, minimizing user strain during continuous operation.

✅ Electronic switch enables speed and impact rate selection for enhanced usability.

✅ The dust collection system DX17 uses the tool’s motor and fan for dust collection, resulting in a lighter, more compact design without compromising performance.

✅ Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop.

✅ High water-resistance compatible with XPT.

✅ Auto-start Wireless System (AWS) enables control via Bluetooth for on-demand dust extraction.

✅ Equipped with a standard chuck compatible with SDS-plus bits.

✅ Three operation modes: Rotation only, Hammering with rotation, and Hammering only.

Specification :

✅ Impact Energy: EPTA-Procedure 05/2009: 3.3 J

✅ Max Output: 1,200 W

✅ Capacity: Concrete (with TCT Bit): 28 mm (1-1/8") | Steel: 13 mm (1/2") | Wood: 32 mm (1-1/4") | Core Bit: 68 mm (2-11/16") | Diamond Core Bit: 80 mm (3-1/8")

✅ No Load Speed (RPM): 0 - 1,130

✅ Dimensions (L x W x H): 391 x 104 x 223 mm (15-3/8 x 4-1/8 x 8-3/4")

✅ Net Weight: 3.8 - 5.5 kg (8.4 - 12.1 lbs)

✅ Work Amount (approx.): 125 holes with BL4040 Mansory drill Ø 10.5 mm concrete 40 N/ mm² Depth 60 mm